F065
Nominal na Diyametro ng Panlabas na Tubo:
- Inirerekomenda ng Enterprise Standard ng HL Cryogenic Equipment. Maaari rin itong gawin ayon sa pangangailangan ng customer.
- Presyon ng Disenyo:
- Inirerekomendang ≤ 16 bar. O kaya piliin ang Welded Connection Type (≤40 bar).
- Materyal ng Panlabas na Tubo
Kung walang espesyal na kinakailangan, ang materyal ng panloob na tubo at panlabas na tubo ay pipiliin nang pareho.
3.1.3 Uri ng Koneksyon na Hinang
odel
Koneksyon
Uri
Nominal na Diametro ng Panloob na Pipa
Presyon ng Disenyo
Materyal
ng Panloob na Tubo
Pamantayan
Paalala
W010
00X
Uri ng Koneksyon na Hinang para sa Static Vacuum Insulated Flexible Hose
DN10, 3/8"
8~40 bar
300 Seryeng Hindi Kinakalawang na Bakal
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Nominal na Diyametro ng Panlabas na Tubo: | |
| Presyon ng Disenyo | Materyal ng Panloob na Tubo. | Ang A ay 304, | DN40, 1-1/2" | Ang C ay 316, |
| Ang D ay 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Presyon ng Disenyo |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Inirerekomenda ≤ DN25 o 1". O kaya ay piliin ang Uri ng Koneksyon ng Vacuum Bayonet na may mga Flanges at Bolts (mula DN10, 3/8" hanggang DN80, 3"), Uri ng Koneksyon na Welded (mula DN10, 3/8" hanggang DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Pamantayan | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Nominal na Diyametro ng Panlabas na Tubo: |
| Inirerekomenda ng Enterprise Standard ng HL Cryogenic Equipment. Maaari rin itong gawin ayon sa pangangailangan ng customer. | Materyal ng Panlabas na Tubo | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Uri | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Pamantayan | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Presyon ng Disenyo. | / | DN25, 1" | DN25, 1" | / | |
| Materyal ng Panloob na Tubo. | / | DN25, 1" | DN25, 1" | / | |
| Ang C ay 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Nominal na Diyametro ng Panloob na Tubo:
| Inirerekomenda ≤ DN25 o 1". O kaya ay piliin ang Uri ng Koneksyon ng Vacuum Bayonet na may mga Flanges at Bolts (mula DN10, 3/8" hanggang DN80, 3"), Uri ng Koneksyon na Welded (mula DN10, 3/8" hanggang DN150, 6") | Nominal na Diyametro ng Panlabas na Tubo: |
| Inirerekomenda ng Enterprise Standard ng HL Cryogenic Equipment. Maaari rin itong gawin ayon sa pangangailangan ng customer. | Presyon ng Disenyo: |
| Inirerekomendang ≤ 16 bar. O kaya piliin ang Welded Connection Type (≤40 bar) | Materyal ng Panlabas na TuboKung walang espesyal na kinakailangan, ang materyal ng panloob na tubo at panlabas na tubo ay pipiliin nang pareho.3.2 Dinamikong Sistema ng Pipa na may Insulated na Vacuum3/S |
| 3.2.1 Uri ng Koneksyon ng Vacuum Bayonet na may mga Pang-ipit | odel |
| Koneksyon | Uri |
| Nominal na Diametro ng Panloob na Pipa | Presyon ng Disenyo |
| Materyal | ng Panloob na Tubo |
| Pamantayan | Paalala |
HDB01008
Uri ng Koneksyon ng Vacuum Bayonet na may mga Clamp para sa Dynamic Vacuum Insulated Flexible Hose
lDN10, 3/8"
l8 bar
| 300 Seryeng Hindi Kinakalawang na Bakal Ang C ay 316, | Materyal ng Panloob na Tubo. | |
| Ang A ay 304, | Ang B ay 304L,Ang C ay 316,Ang D ay 316L, | |
| Iba ang E. | HLH | DB01508 |
| DN15, 1/2" | Presyon ng Disenyo: | Presyon ng Disenyo: |
| DN20, 3/4" | Presyon ng Disenyo: | Presyon ng Disenyo: |
| DN25, 1" | Presyon ng Disenyo: | Presyon ng Disenyo: |
| Nominal na Diyametro ng Panlabas na Tubo: | Presyon ng Disenyo: | Presyon ng Disenyo: |
Inirerekomendang ≤ 8 bar. O kaya ay piliin ang Uri ng Koneksyon ng Vacuum Bayonet na may mga Flanges at Bolts (≤16 bar), Uri ng Koneksyon na Welded (≤40 bar)Materyal ng Panlabas na TuboKung walang espesyal na kinakailangan, ang materyal ng panloob na tubo at panlabas na tubo ay pipiliin nang pareho.
Kondisyon ng Kuryente:
HL-HX-X-Kailangang magsuplay ang lugar ng kuryente sa mga vacuum pump at ipaalam sa HL Cryogenic Equipment ang impormasyon tungkol sa lokal na kuryente (Boltahe at Hertz).-00-X
3.2.2 Uri ng Koneksyon ng Vacuum Bayonet na may mga Flanges at Bolts
odel
Koneksyon
Uri
Nominal na Diametro ng Panloob na Pipa
Presyon ng Disenyo
Materyal
ng Panloob na Tubo
Pamantayan
Paalala
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
300 Seryeng Hindi Kinakalawang na Bakal
Design Pressure
Presyon ng Disenyo.
Ang 08 ay 8bar,
Ang 16 ay 16bar.
Materyal ng Panloob na Tubo.
Ang A ay 304,
Ang B ay 304L,
Ang C ay 316,
Ang D ay 316L,
Iba ang E.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Serye ng Vacuum Insulated Phase Separator | DN10, 3/8" | Armenian
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PransesNominal na Diyametro ng Panlabas na Tubo:X | DN15, 1/2" | |||||
| PransesInirerekomendang ≤ 16 bar. O kaya piliin ang Welded Connection Type (≤40 bar).X | DN20, 3/4" | |||||
| PransesKondisyon ng Kuryente:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| PransesAng 08 ay 8bar,00X | at 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PransesSamoan00X | DN15, 1/2" | |||||
| PransesSindhi00X | DN20, 3/4" | |||||
| PransesTajik00X | DN25, 1" | |||||
| PransesThai00X | DN32, 1-1/4" | |||||
| PransesUzbek00X | DN40, 1-1/2" | |||||
| PransesXhosa00X | DN50, 2" | |||||
| PransesZulu00X | DN65, 2-1/2" | |||||
| PransesOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Kondisyon ng Kuryente:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | 300 Seryeng Hindi Kinakalawang na Bakal | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PransesDN15, 1/2"00X | DN15, 1/2" | |||||
| PransesDN20, 3/4"00X | DN20, 3/4" | |||||
| PransesDN25, 1"00X | DN25, 1" | |||||
| PransesW03200X | DN32, 1-1/4" | |||||
| PransesW04000X | DN40, 1-1/2" | |||||
| PransesW05000X | DN50, 2" | |||||
| PransesW06500X | DN65, 2-1/2" | |||||
| PransesW08000X | DN80, 3" | |||||
| HHose ng Vacuum Jacket00X | DN100, 4" | |||||
| HBalbula ng Pagkontrol ng Daloy ng Oksiheno ng Likido ng Tsina00X | DN125, 5" | |||||
| HPresyong Pakyawan Tsina Tsina ISO Standard Tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSDinamikong Sistema ng Bomba ng Vacuum00X | Serye ng Vacuum Insulated Phase Separator | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PransesWhatsapp00X | DN15, 1/2" | |||||
| PransesWeChat00X | DN20, 3/4" | |||||
| PransesAleman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Griyego
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Danish
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenian
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonianX | DN15, 1/2" | |||||
| HLHFrisianX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Māori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoan00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDThai00X | DN32, 1-1/4" | |||||
| HLHDUzbek00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
